3/4" Inside Diameter Rubber Grommet - 3/16" Groove Width - Fits 1" Holes

Product Overview:

3/4" Inside Diameter Rubber Grommet - 3/16" Groove Width - Fits 1" Holes

Rubber Grommets are used for multiple projects.They're usually used to cover the rough and sharp edges of a hole in metal,wood. They also protect lines,wires and cables from chafing or grazing on rough surfaces.They also be used to reduce vibration and to seal different important under-the-hood and body applications on automobiles.

Measurements:

• Inside Diameter:  3/4" (19mm)
• Groove Width: 3/16" (4.8mm)
• Fits Panel Size Holes:  1" (25.4mm)
• Total Outside Diameter:  1-1/4" (31.8mm)
• Overall Thickness:  9/16" (14.3mm)

Durometer hardness - 60

Can be used indoors or outdoors.

Can be used to seal holes and many other uses.

How to Install a Rubber Grommet:

• Measure and Cut the Hole: Accurately measure the diameter of the wire or cable and cut a hole slightly smaller in the panel or surface where the grommet will be placed.
• Prepare the Grommet: Ensure the rubber grommet is clean and free from any debris. If necessary, lightly lubricate with a silicone-based product for easier installation.
• Insert the Grommet: Gently press the grommet into the hole, starting from one side and working your way around. It should fit snugly without excessive force.
• Thread the Cable or Wire: Once the grommet is securely in place, thread the cable or wire through it. The grommet should provide a protective, snug fit around the cable.
• Final Check: Ensure the grommet is seated properly and provides a tight seal. Adjust if necessary to avoid any movement or chafing of the wires.